The distance from Villaba to Cuenca is 737 miles by road including 158 miles on motorways. Road takes approximately 15 hours and 53 minutes and goes through Tacloban, Catbalogan, Calbayog, Sorsogon City, Ligao, Naga and San Pablo.
You can adjust fuel consumption and fuel price here.
How long is a car ride from Villaba to Cuenca?
Driving time:
15 h 53 min
This time is calculated for driving at the maximum permitted speed, taking into account traffic rules restrictions.
152 mi with a maximum speed 62 mph = 2 h 26 min
43 mi with a maximum speed 56 mph = 45 min
3 mi with a maximum speed 56 mph = 3 min
438 mi with a maximum speed 50 mph = 8 h 48 min
13 mi with a maximum speed 43 mph = 17 min
35 mi with a maximum speed 37 mph = 55 min
28 mi with a maximum speed 31 mph = 53 min
8 mi with a maximum speed 25 mph = 20 min
2 mi with a maximum speed 19 mph = 5 min
16 mi with a maximum speed 12 mph = 1 h 15 min
The calculated driving time does not take into account intermediate stops and traffic jams.
How far is Villaba to Cuenca by land?
The distance between Villaba and Cuenca is 736.9 mi by road including 158.4 mi on motorways.
Precise satellite coordinates of highways were used for this calculation. The start and finish points are the centers of Villaba and Cuenca respectively.
How far is Villaba to Cuenca by plane?
The shortest distance (air line, as the crow flies) between Villaba and Cuenca is 435.6 mi.
This distance is calculated using the Haversine formula as a great-circle distance between two points on the surface of a sphere. The start and finish points are the centers of Villaba and Cuenca respectively. Actual distance between airports may be different.
How many hours is Villaba from Cuenca by plane?
Boeing 737 airliner needs 52 min to cover the distance of 436 mi at a cruising speed of 497 mph.
Small plane "Cessna 172" needs 3 h 11 min to flight this distance at average speed of 136 mph.
This time is approximate and do not take into account takeoff and landing times, airport location and other real world factors.
How long is a helicopter ride from Villaba to Cuenca?
Fast helicopter "Eurocopter AS350" or "Hughes OH-6 Cayuse" need 2 h 55 min to cover the distance of 436 mi at a cruising speed of 149 mph.
Popular "Robinson R44" needs 3 h 20 min to flight this distance at average speed of 130 mph.
This time is approximate and do not take into account takeoff and landing times, aerodrome location and other real world factors.
What city is halfway between Villaba and Cuenca?
The halfway point between Villaba and Cuenca is San Fernando. It is located about 2 mi from the exact midpoint by road.
The distance from San Fernando to Villaba is 370 mi and driving will take about 8 h 49 min. The road between San Fernando and Cuenca has length 367 mi and will take approximately 7 h 3 min.
The other cities located close to halfway point:
Naga is in 365 mi from Villaba and 372 mi from Cuenca
Pamplona is in 376 mi from Villaba and 361 mi from Cuenca
Baao is in 348 mi from Villaba and 389 mi from Cuenca
Where is Villaba in relation to Cuenca?
Villaba is located 436 mi south-east of Cuenca.
Villaba has geographic coordinates: latitude 11.21307, longitude 124.39322.
Cuenca has geographic coordinates: latitude 16.25009, longitude 120.49485.
Which highway goes from Villaba to Cuenca?
The route from Villaba to Cuenca follows AH26, 1, E1.